网站公告:
青岛博度抛丸机厂家本着以“科技创新是第一生产力”的指导思想,引进国外先进生产技术,致力于抛丸机、喷丸机清理设备的新产品,新技术,新工艺,全方位拓展表面清理技术和设备的应用领域。
全国服务热线:15234120110
联系我们 CONTACT US

电话:15234120110

邮箱:985256431@qq.com

地址:山东省青岛市

安全须知 NEWS
当前位置:主页 > 安全须知 >
通过式抛丸机安全使用技术
添加时间:2017-11-03

经过式抛丸机是能连续不间断地对各类物料,如:钢板、钢材、型钢、钢管等,进行除氧化皮、整理和预处理的设备。在运用中要确保设备的运用安全,我们需求做到以下事项:
  (1)禁止违背经过式抛丸机的操作程序,不然可能形成不必要的丢失。
  (2)机器在工作时,操作人员和上、卸料作业人员要穿戴好防护眼镜和作业衣帽。
  (3)因为工件工作速度不明显,在工作过程中,禁止站在轨道上,特别是正对工件运动方向处站人、清丸操作和调查。
  (4)及时整理机器周围散落的丸料,以防滑倒跌伤。
  (5)机器在工作中禁止翻开进出端密封仓调查门。
  (6)经过式抛丸机内部密封材料易焚烧,所以禁止作业温度超过200℃。在进行修理和保养时应避免明火。
  (7)抛丸器在运动过程中禁止翻开顶盖。
  (8)机器在正常作业状态下设备有赤色信号灯,发作反常时蜂鸣器响,这时应按下急停按钮,使整机停止作业,查明原因并排除故障后方许开机。
  (9)进行修理时有必要在电控柜上悬挂警告牌,当需求进入机器内部检修时有必要堵截总电源。
  (10)链条、三角带等防护罩只有在修理时取下,机器工作时应装置结实。
  (11)检修时禁止将工具遗留在螺旋、链条、电机端等处。
  (12)当突发停电时要堵截总电源。
在运用中我们不可避免地需求对其别离器进行调整,详细调整办法为:
  a、恰当调整调理轴与调理板的缝隙,便可操控足够宽度均匀布料及流幕厚度。
  b、别离物的颗粒可经过调整二道调理板得以实现。
  c、合格弹丸经过别离器筛网进入输丸机构料斗中,有效阻隔了较大块状物料的进入,确保了抛丸器的安全作业。
  d、别离器出风口与除尘器管道衔接处设有风量调理板,有必要调整到适合方位,方可确保有用弹丸不被带入废料桶中。

Through type shot blasting machine is capable of continuously on all kinds of materials, such as steel, steel, steel, steel, for descaling, cleaning and pretreatment equipment. To use security equipment in use, we need to do the following matters:

(1) it is strictly forbidden to violate the operation procedures of pass type shot blasting machine, otherwise it may cause unnecessary loss.

(2) when the machine is running, the operators and the upper and the discharging workers should wear protective glasses and work clothes.

(3) because of not obvious workpiece speed, in the operation process, do not stand on the track, especially on the workpiece moving direction at the station, operation and observation of the clear pill.

(4) cleaning machines scattered around the pill material in a timely manner, to prevent slipping.

(5) the machine is strictly prohibited to open import and end seal warehouse observation door in operation.

(6) the internal sealing material of the type shot blasting machine is easy to burn, so the working temperature is not allowed to exceed 200 degrees. In the repair and maintenance of fire should be avoided.

(7) it is prohibited to open cover shot blasting machine in the process of movement.

(8) under normal working condition, the equipment has red signal lamp. When the abnormal happens, the buzzer sounds, then the emergency stop button should be pressed to stop the whole machine, find out the reason and remove the fault, then start the operation.

(9) repairs must hang warning signs in the cabinet, when the need to enter inside the machine maintenance must cut off the total power.

(10) the protective cover such as chain and triangle belt can be removed only when it is repaired, and the machine should be firmly installed when running.

(11) maintenance is prohibited when the tool is left in the spiral, motor end chain, etc..

(12) when a sudden power outage to cut off the total power.

In use, we inevitably need to adjust its separator, the specific adjustment method is:

A, adjust the gap between the adjusting shaft and the adjusting plate properly, and then control the enough width and the thickness of the flow curtain.

B, separation of particles can be adjusted through the adjusting plate two can be achieved.

The C and qualified projectile pass through the screen of the separator into the hopper of the feeding mechanism, which effectively blocks the entrance of larger blocks of materials and ensures the safety of the shot blasting device.

D, separator outlet and dust collector pipe connection place has air flow adjusting plate, must adjust to the appropriate position, can ensure that useful bullets are not brought into the waste bucket.